ISEDA 2026 - International Symposium of EDA (ISEDA 2026)

Website https://www.eda2.com/iseda/index.html | Edit Freely

Category EDA

Deadline: February 10, 2026 | Date: May 08, 2026-May 10, 2026

Venue/Country: Singapore, Singapore

Updated: 2026-01-15 14:54:57 (GMT+9)

Call For Papers - CFP

Dte: MAY 8-10, 2026

Venue: Singapore

Website: https://www.eda2.com/iseda/index.html

Advised by IEEE/CEDA and ACM/SIGDA, and organized by EDA², the ISEDA (International Symposium of EDA) is an annual premier forum dedicated to VLSI design automation. The symposium aims at exploring the new challenges, presenting leading-edge technologies and providing EDA community with opportunities of predicting future directions in EDA research areas. ISEDA covers the full range of EDA topics from device and circuit levels up to system level, from analog to digital designs as well as manufacturing. The format of meeting intends to cultivate productive and novel interchangeable ideas among EDA researcher and developers. Academic and industrial EDA related professionals who are interested in EDA's theoretical and practical research are all welcomed to contribute to ISEDA.

Committee

Executive Committee

General Chairs

Prof. Hao, Yue, Professor of Xidian University, Academician of the Chinese Academy of Sciences

Prof. Wang, Runsheng, Peking University

Steering Committee

Prof. Wei, Shaojun, Tsinghua University

Prof. Zeng, Xuan, Fudan University

Dr. Girard, Patrick, French National Center for Scientific Research

Prof. Deen, Jamal, McMaster University

Dr. Tanurhan, Yankin, Synopsys

Technical Program Committee

Conference Chairs

Dr. Hui, Chiu Wing Colin, GlobalFoundries

Prof. Ho, Tsung-Yi, The Chinese University of Hong Kong

Prof. Qu, Gang, University of Maryland

Technical Program Chairs

Prof. Yu, Bei, The Chinese University of Hong Kong

Prof. Schlichtmann, Ulf, Technical University of Munich

Ms. Leung, Kafai, A*STAR Institute of Microelectronics

Keynote Chair

Prof. Liang, Yun, Peking University

Publication Chair

Prof. Xu, Qiang, The Chinese University of Hong Kong

Panel Chair

Mr. Ong, Jonathan, Applied Materials

Industry Chair

Mr. Lam, Lup Meng, Synopsys

Special Session Chair

Mr. Ghosh, Swaroop, Pennsylvania State University

Publicity Chair

Prof. Basu, Kanad, Rensselaer Polytechnic Institute

Tutorial Chair

Prof. Sasan, Avesta, University of California, Davis

Tutorial Co-chair

Prof. Lim, Yeow Kheng, National University of Singapore

Outreach Chair - US

Prof. Forte, Domenic, University of Florida

Outreach Chair - Europe

Prof. Halak, Basel, University of Southampton

Outreach Chair - Asia

Prof. Li, Yongfu, Shanghai Jiao Tong University

Outreach Chair - Canada

Prof. Chun, Peter, University of Alberta

Track Committee

System-Level Modeling and Design Methodology

Chairs:

Sun, Qi, Zhejiang University

Zhao, Jieru, Shanghai Jiao Tong University

Memory Architecture and Near/In Memory Computing

Chairs:

Chen, Xiaoming, Institute of Computing Technology, CAS

Zhang, Li, Technical University of Darmstadt

Analog-Mixed Signal Design Automation

Chairs:

Zhu, Keren, Fudan University

Du, Li, Nanjing University

High-Level, Bahavioral, and Logic Synthesis and Optimization

Chairs:

Qian, Weikang, Shanghai Jiao Tong University

Pilato, Christian, Politecnico di Milano

Analysis and Optimization for Power and Timing

Chairs:

Xie, Zhiyao, The Hong Kong University of Science and Technology

Li, Bing, Technische Universität Ilmenau

Physical Implementation

Chairs:

Ma, Yuzhe, The Hong Kong University of Science and Technology (Guangzhou)

Lin, Yibo, Peking University

Testing, Validation, Simulation, and Verification

Chairs:

Zhang, Hongce, The Hong Kong University of Science and Technology (Guangzhou)

Zheng, Yuanjin, Nanyang Technological University

Design for Manufacturability and Reliability

Chairs:

Chen, Yu-Guang, National Central University

Li, Meng, Peking University

Packaging & Multi-Physics Simulation

Chairs:

Peng, Yarui, Southeast University

Tseng, Tsun-Ming, Technical University of Munich

Technology and Modeling

Chairs:

Ng, Kian Ann, DigiPen Institute of Technology Singapore

Chen, Quan, Southern University of Science and Technology

Emerging Technologies and Applications

Chairs:

Lee, Vincent, National University of Singapore

Li, Xingquan, Peng Cheng Laboratory

AI & Open Source EDA

Chairs:

Yu, Cunxi, University of Maryland

Tan, Chee Wei, Nanyang Technological University

Keynote Speakers

Prof. Luca Benini, Università di Bologna

Prof. Yeo, Yee Chia, Deputy Chief Executive (Innovation & Enterprise), A*STAR

Mr. Subramani Kengeri, Corporate Vice President and GM, Systems to Materials, Applied Materials

Prof. Yeo, Seng Kiat, Singapore University of Technology and Design

Mr. Don Chan, Vice president, Research & Development, Cadence Design Systems, Inc.

Prof. Keshab Parhi, University of Minnesota

Prof. Chakrabarty, Krishnendu, Fulton Professor of Microelectronics, Arizona State University

Prof. Massimo Alioto, National University of Singapore

Prof. Takahashi, Atsushi, Institute of Science Tokyo

Prof. Wunderlich, Hans-Joachim, Professor Emeritus of the University Stuttgart

Call for Papers

Original papers in, but not limited to the following areas are invited:

[1] System-Level Modeling and Design Methodology

1.1 HW/SW co-design, co-simulation and co-verification

1.2 System-level design exploration, synthesis, and optimization

1.3 System-level formal verification

1.4 System-level modeling, simulation and validation

1.5 Networks-on-chip and NoC-based system design

1.6 Constructing Hardware in Scala Embedded Language

[2] Memory Architecture and Near/In Memory Computing

2.1 Storage system and memory architecture

2.2 On-chip memory architectures and management: Scratchpads, compiler, controlled memories, etc.

2.3 Memory/storage hierarchies and management for emerging memory technologies

2.4 Near-memory and in-memory computing

[3] Analog-Mixed Signal Design Automation

3.1 Analog/mixed-signal/RF synthesis

3.2 Analog layout, verification, and simulation techniques

3.3 High-frequency electromagnetic simulation of circuit

3.4 Mixed-signal design consideration

[4] High-Level, Behavioral, and Logic Synthesis and Optimization

4.1 Digital Simulation / Emulation

4.2 High-Level Synthesis

4.3 Logic Synthesis

4.4 Synthesis for Approximate Computing

[5] Analysis and Optimization for Power and Timing

5.1 Deterministic/statistical timing analysis and optimization

5.2 Process technology modeling for timing analysis

5.3 Power modeling, analysis and simulation

5.4 Low-power design and optimization at circuit and system levels

5.5 Thermal aware design and dynamic thermal management

5.6 Energy harvesting and battery management

[6] Physical Implementation

6.1 Floorplanning, partitioning, placement and routing optimization

6.2 Interconnect planning and synthesis

6.3 Clock network synthesis

6.4 Physical design of 3D/2. 5D IC and package ( e. g. , TSV, interposer, monolithic)

6.5 Post layout and post-silicon optimization

6.6 Layout Verification

[7] Testing, Validation, Simulation, and Verification

7.1 RTL and gate-leveling modeling, simulation, and verification

7.2 Circuit-level formal verification

7.3 ATPG, BIST and DFT

7.4 System test and 3D IC test, online test and fault tolerance

7.5 Memory test and repair

[8] Design for Manufacturability and Reliability

8.1 Design-technology co-optimization (DTCO)

8.2 Standard and custom cell design and optimization

8.3 Reticle enhancement, lithography-related design optimizations and design rule checking

8.4 Design for manufacturability, yield, defect tolerance, cost issues, and DFM impact

8.5 Device-, gate, and circuit-level techniques for reliability analysis and optimization (e.g., soft error, aging, etc.)

8.6 Post-Layout optimizations

[9] Packaging & Multi-Physics Simulation

9.1 Extraction, TSV, and package modeling

9.2 Chiplet Design and Design tools

9.3 Chip Level Thermal Simulation

9.4 Packaging Stress Analysis

9.5 Multi-Physics Simulation

9.6 Signal/Power integrity, EM modeling and analysis

[10] Technology & Modeling

10.1 Device Compact Modeling

10.2 Process Design Kit

10.3 Semiconductor Process & Device Simulation

10.4 Cell Library Design, Characterization and Verification

10.5 New transistor/device and process technology: spintronic, phase-change, single-electron, 2D materials, etc.

[11] Emerging Technologies and Applications

11.1 Biomedical, biochip, nanotechnology, MEMS

11.2 Design automation for 3D ICs and heterogeneous integration

11.3 Design automation for quantum computing

11.4 Design automation for silicon photonics

11.5 Design automation for compound semiconductors verification

[12] AI & Open Source EDA

12.1 Artificial Intelligence for EDA

12.2 Cloud / Parallel Computing for EDA

12.3 Open Source EDA

12.4 EDA Database

12.5 EDA Standardization

Submission Requirements

Please read the following submission guidelines carefully before preparing and submitting your manuscript.

Authors are invited to submit original papers, which have not been published elsewhere and are not currently under consideration for another journal, conference or workshop. Research findings can be submitted as full papers. All paper submissions must be done electronically using the submission system.

Best Paper Award, Honorable Mention Paper Award will be selected after the presentations.

Invited Talks: Need an abstract within one page

Extended Abstract: 1-2 pages

Regular Full Paper: 4-6 pages

*Note: Extended abstract will not be published. If you have the publication purpose, please submit full paper before the deadline.

Submission System

https://www.eda2.com/conferenceHome/submissionHome

Contact Us

Paper Submission: Joyce Zhong, isedaeda2.com

EDA²: Qiuping Huang, conference_affairseda2.com

Local Contact: Summer Boo, infosiliconexus.co or +65-89220304