ICME 2011 - The 2011 International Conference of Mechanical Engineering

Website www.iaeng.org | Edit Freely

Category ICME 2011

Deadline: March 06, 2011 | Date: July 06, 2011-July 08, 2011

Venue/Country: London, U.K.

Updated: 2010-12-12 18:02:15 (GMT+9)

Call For Papers - CFP

London, U.K., 6-8 July, 2011

Conferences Publications Membership About IAENG FAQ Contact Us

The 2011 International Conference of Mechanical Engineering (ICME'11) will take place in London, U.K., 6-8 July, 2011.

The conference ICME'11 is held under the World Congress on Engineering 2011. The WCE 2011 is organized by the International Association of Engineers (IAENG), and serves as good platforms for the engineering community members to meet with each other and to exchange ideas. The last IAENG conferences attracted more than one thousand participants from over 30 countries. All submitted papers will be under peer review and accepted papers will be published in the conference proceeding (ISBN: 978-988-18210-6-5). The abstracts will be indexed and available at major academic databases. The accepted papers will also be considered for publication in the special issues of the journal Engineering Letters, in IAENG journals and in edited books.

Calls for Manuscript Submissions

Proposals for special conference sessions and tutorials deadline: 30 December, 2010

Draft Paper Submission Deadline: 6 March, 2011

Camera-Ready Papers Due & Registration Deadline: 31 March, 2011

WCE 2011: 6-8 July, 2011

The topics of the ICME'11 include, but not limited to, the following:

Aerodynamics

Fluid Dynamics

Compressible Flows

Computational Mechanics

Biomechanics

Automotive Engineering

Heat and Mass Transfer

Nanomaterial Engineering

Plasticity Mechanics

Fracture

Geomechanics

Multibody Dynamics

Nonlinear Dynamics

Structural Dynamics

Vibrations

Acoustics

Noise Control

Material Engineering

Transport Phenomena

Manufacturing Process

Mechatronics

The ICME Program Committee

ICME Conference Committee

Dr Rehan Ahmed

Lecturer in mechanical engineering, Heriot-Watt University, School of Engineering & Physical Sciences, UK

Dr. R.K. AL-Dadah

Lecturer, Mechanical and Manufacturing Engineering Department,

School of Engineering, University of Birmingham, UK

Dr. Carl Anthony

Research scientist, Department of Mechanical and Manufacturing Engineering, University of Birmingham, UK

Dr. Gaetano Burriesci

Lecturer, Department of Mechanical Engineering, University College London, UK

Professor Colin Bailey (FICE; co-chair)

Professor of Structural Engineering,

School of Mechanical, Aerospace and Civil Engineering, The University of Manchester, UK

Dr. Alastair Cooke

Senior Lecturer, Dynamics, Simulation and Control Group, Department of Aerospace Sciences, School of Engineering, Cranfield University, UK

Dr. Rajarshi Das

Research Scientist, CSIRO Mathematical and Information Sciences, Australia

Dr Daniele Dini (D. Phil. Oxford)

Lecturer of Mechanical Engineering (Tribology Group), Department of Mechanical Engineering

Imperial College London, UK

Dr. Hongbiao Dong (Royal Society Industry Fellow (Rolls-Royce))

Lecturer in Materials, Department of Engineering, University of Leicester, UK

Professor Dimitris Drikakis (co-chair; FRAeS, FIoN)

Head of Aerospace Sciences Department

Chair of Fluid Mechanics and Computational Science

Cranfield University, School of Engineering, United Kingdom

Dr. John Durodola (FIMechE; co-chair)

Head of Mechanical Engineering Department, Reader in Stress Analysis and Materials,

Oxford Brookes University, UK

Dr. Taha M.S. Elhag

Lecturer and Director of Construction Management Programme, School of Mechanical, Aerospace & Civil Engineering,

Project Management Division, University of Manchester, UK

Dr Kamran Etebar

Principal Lecturer and Director of Undergraduate Programmes, Faculty of Engineering, Kingston University, UK

Prof. Graham H. Galbraith (co-chair)

Pro Vice-Chancellor International

Glasgow Caledonian University, UK

Dr Roy Garwood

Head of Engineering, Faculty of Advanced Technology, University of Glamorgan, UK

Professor Philip H Gaskell (co-chair)

Professor of Fluid Mechanics

School of Mechanical Enginnering, University of Leeds, UK

Dr Yakun Guo

Lecturer, Department of Engineering, University of Aberdeen, King's College, UK

Dr H Hadavinia

Senior Lecturer, Faculty of Engineering, Kingston University, UK

Dr. Y. Hardalupas (co-chair)

Reader in Multiphase Flows, Mechanical Engineering Department, Imperial College London, UK

Prof. Li He (Ph.D Cambridge; co-chair)

Professor and Chair of Thermodynamics and Fluid Mechanics, School of Engineering, Durham University, UK

Dr Khalid Hussain

Director of Studies in Mechanical & Automotive Engineering, School of Engineering, Design & Technology (EDT4), University of Bradford, UK

Dr. Mohammad Jaffar

Lecturer, Loughborough University, UK

Dr. Artur J. Jaworski

Senior Lecturer, EPSRC Advanced Research Fellow,

School of Mechanical, Aerospace and Civil Engineering, University of Manchester, UK

Dr. Mohammed Khan

Associate Dean - International Programmes, School of Engineering, Design and Technology, University of Bradford, England

Dr Konstantinos Kontis (co-chair)

Senior Lecturer and Head of S.I. Group & Laboratory, School of MACE, University of Manchester, UK

Dr Tina Lekakou

Senior Lecturer, School of Engineering, University of Surrey, UK

Dr. Terese Lovas

Lecturer in Future Energy Conversion Technologies, Department of Engineering, Queen Mary, University of London;

College Lecturer in Engineering, Member of College Council, Churchill College, University of Cambridge, UK

Dr. Warren Manning

Lecturer, Engineering and Technology, Manchester Metropolitan University, UK

Professor Paul Maropoulos

Professor of Innovative Manufacturing, Director of the Global Digital Enterprise Research Laboratory,

Department of Mechanical Engineering, University of Bath, UK

Dr Samir Mekid

Lecturer, School of Mechanical, Aerospace and Civil Engineering, The University of Manchester, UK

Prof. Farhad Nabhani CSE, ME, MEEM, SBB co-chair

Professor - Biomechanics and Manufacturing, School of Science and Technology,

MSc Course Leader, University of Teesside, UK

Dr. Oluremi Olatunbosun

Senior Lecturer in Mechanical Engineering and Head, Vehicle Dynamics Laboratory,

Department of Mechanical and Manufacturing Engineering, The University of Birmingham, UK

Dr. Joshua R Omer

Research scientist, Division of Civil Engineering, Faculty of Advanced Technology, University of Glamorgan, United Kingdom

Prof. A. Alper Ozalp

Associate Professor of Mechanical Engineering, Engineering and Architecture Faculty, Uludag University, Turkey

Dr. Panagiota Pantazopoulou

Senior Consultant, Building Rersearch Establishment, Garston, Watford, United Kingdom

Dr. William K-S. Pao

Lecturer, School of Mechanical, Aerospace and Civil Engineering, The University of Manchester, UNITED KINGDOM

Professor Philip D Prewett (DPhil Oxford, FInstP, FIoN, FRSA; co-chair & session chair (Microelectromechanical systems))

Lucas Professor of MicroEngineering and Nanotechnology, Former Joint Head of Department, Department of Mechanical Engineering and Manufacturing, University of Birmingham, UK

Dr. Muhammad Imran Rafiq

Lecturer in Civil Engineering Structures, School of Engineering, University of Surrey, UK

Dr. George F Rosala

Design Programme Director, School of Engineering, Design & Technology, University of Bradford, UK

Dr. M. Necip Sahinkaya

Reader in Mechanical Engineering, Department of Mechanical Engineering, University of Bath, U.K.

Dr. Stephen Samuel

Senior Lecturer in Mechanical/Automotive Engineering, School of Technology, Oxford Brookes University, UK

Prof. Lakmal Seneviratne (co-chair)

Professor of Mechatronics and Head of the Division of Engineering,

King's College London, UK

Dr. Evgeniy Shapiro

Lecturer, Fluid Mechanics and Computational Science Group, Cranfield University, School of Engineering, United Kingdom

Dr. Arezki Slaouti

Senior Lecturer in Thermofluids Engineering,

Department of Engineering and Technology, Manchester Metropolitan University, UK

Dr. John Sweeney

Reader in Polymer Mechanics, School of Engineering, Design and Technology, University of Bradford, UK

Prof. Magd Abdel Wahab (co-chair)

Professor of Civil Engineering, Xios University College Limburg, Belgium

Prof Sergei V. Utyuzhnikov

Senior Research Fellow, School of Mechanical, Aerospace & Civil Engineering, University of Manchester, UK

Dr. Dmitry Vlasenko

Assistant professor , Otto-von-Guericke-University Magdeburg, Institute of Mobile Systems, Germany

Dr Yawei Wang

Senior Lecturer in Automotive Engineering, Faculty of Engineering, Kingston University, UK

Dr. Dongsheng Wen

Reader in Nanotechnology and Energy Engineering, School of Engineering and Materials Science, Queen Mary University of London, UK

Dr Hongming Xu (DIC, CEng, FIMechE; co-chair)

Reader in Automotive Engineering, Department of Mechanical Engineering, The University of Birmingham, UK

WCE Congress Co-chairs

Prof. Alexander M. Korsunsky

Professor of Engineering Science

Dean, Trinity College

Department of Engineering Science, University of Oxford, UK

Prof. Andrew Hunter

Professor & Head of Department

Head of Vision and AI Research Group,

Dean of Research,

Department of Computing and Informatics,

Lincoln University, UK

Prof. David WL Hukins, CPhys, FinstP, FIPEM, FRSE

Professor of Bio-medical Engineering

Head of Department of Mechanical & Manufacturing Engineering,

University of Birmingham, UK

Prof. Len Gelman (honorary co-chair)

Professor and Chair in Vibro-Acoustic Monitoring,

Chairman of the Condition Monitoring Technical Committee, the British Institute of NDT,

Director, Centre of Vibro-Acoustics and Fatigue,

Director, International Institute of Acoustics and Vibration (USA)

Cranfield University, UK

Dr. Christopher John Hogger (honorary co-chair)

Senior Lecturer

Department of Computing

Imperial College London, UK

Prof. Darek J. Ceglarek (ICMEEM honorary co-chair)

Professor, International Manufacturing Centre, University of Warwick, UK

Professor, Department of Industrial and Systems Engineering

The University of Wisconsin-Madison, USA

Fellow of CIRP; Associate Editor, IEEE Transactions on Automation Science and Engineering, and ASME Transactions on Manufacturing Science and Engineering

Dr. Stephen Payne (ICSBB honorary co-chair)

University Lecturer in BioMedical Engineering

Dean of Degrees Keble College, Head of Physiological Understanding through Modelling, Monitoring and Analysis Group,

Department of Engineering Science, University of Oxford, UK