ICMEEM 2011 - The 2011 International Conference of Manufacturing Engineering and Engineering Management

Website www.iaeng.org | Edit Freely

Category ICMEEM 2011

Deadline: March 06, 2011 | Date: July 06, 2011-July 08, 2011

Venue/Country: London, U.K.

Updated: 2010-12-12 18:02:40 (GMT+9)

Call For Papers - CFP

London, U.K., 6-8 July, 2011

Conferences Publications Membership About IAENG FAQ Contact Us

The 2011 International Conference of Manufacturing Engineering and Engineering Management (ICMEEM'11) will take place in London, U.K., 6-8 July, 2011.

The conference ICMEEM'11 is held under the World Congress on Engineering 2011. The WCE 2011 is organized by the International Association of Engineers (IAENG), and serves as good platforms for the engineering community members to meet with each other and to exchange ideas. The last IAENG conferences attracted more than one thousand participants from over 30 countries. All submitted papers will be under peer review and accepted papers will be published in the conference proceeding (ISBN: 978-988-18210-6-5). The abstracts will be indexed and available at major academic databases. The accepted papers will also be considered for publication in the special issues of the journal Engineering Letters, in IAENG journals and in edited books.

Calls for Manuscript Submissions

Proposals for special conference sessions and tutorials deadline: 30 December, 2010

Draft Paper Submission Deadline: 6 March, 2011

Camera-Ready Papers Due & Registration Deadline: 31 March, 2011

WCE 2011: 6-8 July, 2011

The topics of the ICMEEM'11 include, but not limited to, the following:

Engineering Physiology

Biomedical Instrumentation

Engineering Statistics

Quality Management Systems

Maintenance Engineering

Reliability and Quality Control

Engineering Experimental Design

Integrated Product Engineering

Engineering Risk and Decision Analysis

Computer Supported Collaborative Engineering

Human Factors and Ergonomics

Computer-Aided Design

Computer Aided Manufacturing

Computer Simulation Methods

Facilities Design and Logistics

Manufacturing Processes and Methods

Information Systems for the Manufacturing

Quality and Productivity Management

Optimization Methods

Intelligent Engineering Systems

Engineering Management and Leadership

Management Science

Managerial economics

Systems thinking and analysis

Optimization

Integer programming

Linear programming

Nonlinear programming

Assignment problem

Transportation network design

Simulation

Statistical Analysis

Stochastics Modelling

Reliability and maintenance

Queueing theory

Game theory

Graph theory

OR algorithms and software developments

OR applications and case studies

The ICMEEM Program Committee

ICMEEM Conference Committee

Prof. Munir Ahmad

Professor, School of Science & Technology, University of Teesside, UK

Dr. Ioannis Angeli

Lecturer, Higher Technical Institute, Mechanical & Marine Engineering Department, Nicosia, Cyprus

Prof. Paul M Braiden (FREng; ICMEEM honorary co-chair)

Emeritus Professor of Engineering,

School of Mechanical and Systems Engineering, Newcastle University, UK

Dr Peter Fenn

Senior Lecturer, School of Mechanical, Aerospace and Civil Engineering, University of Manchester, UK

Dr Yee Mey Goh

Research Officer, Innovative Manufacturing Research Centre,

Department of Mechanical Engineering, University of Bath, UK

Dr. Ben James Hicks

Senior Research Fellow, Innovative Manufacturing Research Centre, Department of Mechanical Engineering, University of Bath, UK

Professor Simon Hodgson ( co-chair)

Assistant Dean and Professor of Functional & Advanced Materials,

School of Science and Technology, University of Teesside, UK

Professor Huosheng Hu

Department of Computer Science, University of Essex, U.K.

Dr. Winifred Ijomah

Research Scientist, Innovative Manufacturing Centre, Department of Mechanical Engineering, University of Bath, UK

Dr. M. Latif

Senior Lecturer, Department of Engineering and Technology, Manchester Metropolitan University, United Kingdom

Prof. Lin Li (FIEE; co-chair)

Professor, Chair of Laser Engineering, Director of Laser Processing Research Centre,

School of Mechanical, Aerospace and Civil Engineering, The University of Manchester, UK

Dr. Ioannides Marinos

Lecturer, Computer Studies Department, Higher Technical Institute, Cyprus

Prof. Syed H. Masood

Professor and Program Coordinator (Advanced Manufacturing Technology), Swinburne University of Technology, Australia

Dr. Paul Mativenga

Lecturer, School of Mechanical, Aerospace and Civil Engineering, The University of Manchester, UK

Dr Samir Mekid (co-chair)

Lecturer, School of Mechanical, Aerospace and Civil Engineering, The University of Manchester, UK

Prof. Farhad Nabhani

Professor - Biomechanics and Manufacturing, School of Science and Technology,

MSc Course Leader, University of Teesside, UK

Dr. Mori Nejad Vaezi-Nejad

Senior Lecturer in Communications Technology, Department of CCTM at North Campus, London Metropolitan University, UK

Prof. S. Ayse Ozel

Department of Industrial Engineering, Engineering and Architecture Faculty, Uludag University, Turkey

Prof. Miquel Angel Piera (co-chair)

Professor of the Universitat Autonoma de Barcelona (UAB), director of the McLeod Institute for Simulation Sciences - Spanish Center, Spain

Dr Steve Plummer

Principal Lecturer, School of Engineering, University of Brighton, UK

Dr. H.S. Qi

School of Engineering, Design & Technology, University of Bradford, UK

Dr. Muhammad Imran Rafiq

Lecturer in Civil Engineering Structures, School of Engineering, University of Surrey, UK

Professor Vinesh Raja (FIMechE, FRSA, FRSH)

Professorial Fellow and Head of Informatics, Warwick Manufacturing Group,

International Manufacturing Centre, University of Warwick, UK

Prof. Rajat Roy

Professorial Fellow, Warwick Manufacturing Group, University of Warwick, UK

Dr. Tim Short (co-chair)

Senior Lecturer in Engineering Design, Department of Engineering, University of Liverpool, United Kingdom

Dr. Robert Trimble

Principal Lecturer in Engineering Operations Management, University of Sunderland, School of Computing & Technology, United Kingdom

Dr. Qing Wang

Lecturer, School of Engineering, Durham University, United Kingdom

Dr. Philip Webb

Associate Professor, School Of Mechanical, Materials and Manufacturing Engineering, The University of Nottingham, UK

Prof. David Wimpenny

Professor and Head of Rapid Prototyping, Faculty of Computing Sciences & Engineering, The Innovation Centre, De Montfort University, UK

Dr. Roy Woodhead

Senior Lecturer, Technology Management, School of Technology, Oxford Brookes University, UK

Dr. Nan Zhang

Lecturer, Centre for Process Integration,

School of Chemical Engineering and Analytical Science, University of Manchester, UK

Dr Yuyang Zhao

Researcher, Knowledge and Information Management (KIM) Grand Challenge Project, University of Cambridge, and

Research Officer, Innovative Manufacturing Research Centre, Department of Mechanical Engineering, University of Bath, UK

WCE Congress Co-chairs

Prof. Alexander M. Korsunsky

Professor of Engineering Science

Dean, Trinity College

Department of Engineering Science, University of Oxford, UK

Prof. Andrew Hunter

Professor & Head of Department

Head of Vision and AI Research Group,

Dean of Research,

Department of Computing and Informatics,

Lincoln University, UK

Prof. David WL Hukins, CPhys, FinstP, FIPEM, FRSE

Professor of Bio-medical Engineering

Head of Department of Mechanical & Manufacturing Engineering,

University of Birmingham, UK

Prof. Len Gelman (honorary co-chair)

Professor and Chair in Vibro-Acoustic Monitoring,

Chairman of the Condition Monitoring Technical Committee, the British Institute of NDT,

Director, Centre of Vibro-Acoustics and Fatigue,

Director, International Institute of Acoustics and Vibration (USA)

Cranfield University, UK

Dr. Christopher John Hogger (honorary co-chair)

Senior Lecturer

Department of Computing

Imperial College London, UK

Prof. Darek J. Ceglarek (ICMEEM honorary co-chair)

Professor, International Manufacturing Centre, University of Warwick, UK

Professor, Department of Industrial and Systems Engineering

The University of Wisconsin-Madison, USA

Fellow of CIRP; Associate Editor, IEEE Transactions on Automation Science and Engineering, and ASME Transactions on Manufacturing Science and Engineering

Dr. Stephen Payne (ICSBB honorary co-chair)

University Lecturer in BioMedical Engineering

Dean of Degrees Keble College, Head of Physiological Understanding through Modelling, Monitoring and Analysis Group,

Department of Engineering Science, University of Oxford, UK