Understanding Attribute Acceptance Sampling including Z1.4 and c=0 Plans - Webinar By GlobalCompliancePanel

Website https://www.globalcompliancepanel.com/control/w_product/~product_id=600445?channel=mailer&camp=webin | Edit Freely

Category Health Care, Medical Device, Compliance Training

Deadline: April 13, 2011 | Date: April 13, 2011

Venue/Country: Wilmington, U.S.A

Updated: 2011-03-29 13:30:18 (GMT+9)

Call For Papers - CFP

We explain the basis for sampling plans, the binomial distribution, and show how it helps us understand the sampling plan's performance using the operating characteristic (OC) curve. Participants will gain a solid understanding of how the OC curve is built, how to use it, and how to identify some of the most important points on the curve, including the AQL and RQL points. The course also provides complete descriptions of three other important curves that help you understand a sampling plan. The average sample number (ASN) helps you predict the number of samples you will take. The average outgoing quality (AOQ) helps you foresee the results if you inspect rejected lots. The average total inspected (ATI) helps you calculate how many items you will inspect including rejected lots. Users of Z1.4 will want to understand how to set up sampling and select parameters such as AQL and Level. The course provides a complete description of Z1.4, showing the process from receiving the lot to selecting the sample size to making the accept/reject decision. We will discuss the following issues:

* How to use the sampling tables to determine the sampling plan

* Ways to avoid common errors and misunderstandings with the sampling tables

* The difference between single, double, and multiple sampling plans

* Why double sampling plans are the most economical choice

* The reasons for the switching rules between normal, reduced, and tightened

* The use of the switching rules to help improve your supplier management program

* How the switching rules can help you reduce inspection cost

The c=0 plans are very popular, since they are based on the notion that everything in the sample should pass inspection. The course examines these plans using the curves described above. The OC curve, in these plans, has a different shape that can lead to problems. We will discuss the following issues:

* How to use the c=0 plans instead of Z1.4 plans

* The basis for the plans using the RQL point

* The differences in the OC curves and why they can cause problems

* How a change from Z1.4 to c=0 can impact your inventory and disrupt your suppliers

Why should you attend: Imagine this! Your company uses acceptance sampling in your manufacturing process and your manager asked to make sure it is cost effective. She also knows there is some risk associated with sampling, but she admits she doesn’t completely understand it. You now have a new assignment; assure your manager that you have good balance between risk and cost. The person who set up the system retired a few years ago and isn’t available to help. You have also heard about some new methods called c=0 or zero based acceptance.

* How do you know how much your inspection system costs?

* Are you inspecting too much, and wasting money?

* Are you inspecting too little and incurring risk?

* Do your current managers and supervisors understand how the system works?

* Will your ISO 9001 registrar ask for justification of these statistical methods?

* Should you start to use these c=0 plans you have heard about?

* Can you improve the process?

Areas Covered in the Session:

* Sampling concepts

o With or without replacement

o Simple or stratified sampling

* The binomial distribution

o Possible outcomes and Bernoulli trials

o The binomial formula and what it means

o The cumulative binomial

* Sampling plans

o The AQL concept

o The ideal OC curve

o The practical OC curve

o Reading risk off the OC curve

o Special points on the practical OC curve

+ The AQL point

+ The IQL point

+ The RQL point

* Characterizing sampling plans

o Using rectifying inspection

o The four important curves

+ The OC curve

+ The ASN curve

+ The AOQ curve

+ The ATI curve

* Z1.4 Plans

o Setting up the plan

+ Selecting the Level

+ Selecting the AQL

+ Knowing the lot size

o Selecting single, double, or normal plans

+ Single sample plans

+ Double sample plans

+ Multiple sample plans

o Cost analysis for single v. double plans

o Switching rules

+ When to switch

+ Why reduced inspection lowers cost

+ How tightened inspection can help improve supplier performance

* c=0 plans

o How they are matched to Z1.4 plans

+ The RQL point is the key

+ Making the curves cross at one point

+ How to employ switching rules

o The OC curve

+ It is not the ideal curve

+ The difference in shape and the problems it causes

o Consequences of moving from Z1.4 to c=0

+ Inventory management and stock-outs

* Supplier management and performance metrics

Who Will Benefit: This seminar is designed for people in manufacturing who are involved in setting product specifications, setting up acceptance plans, performing acceptance activities, and supply chain management. Attendees should have knowledge of manufacturing process that includes acceptance activities such as incoming, in-process, and final acceptance. This typically includes:

* Quality Engineers

* Production and Process Engineers

* Manufacturing Engineers

* Design Engineers

* Purchasing Managers

* Purchasing Agents

* Supplier Quality Engineers

* Quality Supervisors

* Quality Inspectors

* Quality Managers

Price List:

Live : $245.00

Corporate live : $995.00

Recorded : $295.00