IATPA 2011 - First Workshop on Industrial Automation Tool Integration for Engineering Project Automation

Website cdl.ifs.tuwien.ac.at/iatpa2011 | Edit Freely

Category IATPA 2011

Deadline: July 25, 2011 | Date: September 05, 2011

Venue/Country: Toulouse, France

Updated: 2011-07-10 21:33:43 (GMT+9)

Call For Papers - CFP

in conjunction with the

16th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA'2011)

05.09.2011, Toulouse, France

http://cdl.ifs.tuwien.ac.at/iatpa2011

Modern real-world and large-scale industrial systems engineering projects involve the cooperation of a wide range of engineering systems and tools that use different technical platforms and heterogeneous data models. The engineering of e.g., power plants or car manufactures requires coordinated information exchange between different engineering disciplines (e.g., process, mechanical, electrical, and software engineering), which is complex and hard to achieve using traditional systems engineering techniques. Well-established software engineering methods and approaches (e.g., iterative development processes, issue tracking systems) could provide additional value to systems engineering projects, but require careful integration and seamless collaboration with other engineering fields to achieve industrial acceptance.

Today's system integration technologies are suitable to bridge most of the technical and semantic gaps between these automation systems engineering tools. However, error-prone and time-consuming human work (e.g., manually copying information from one to another tool) is needed to handle integration concerns at the interfaces of different engineering disciplines as each of them has their specific engineering tools and engineering systems. Therefore the definition, enactment, and monitoring of automated engineering processes crossing several interfaces is hard to define and establish. The goal of the workshop is the investigation of methods and techniques for the automation support of automation systems engineering processes to improve the effectiveness and efficiency of engineering projects.

Topics of interest in this workshop include, but are not restricted to:

- Engineering Tool Integration

-- Architectural Design

-- Tool Data Integration

-- Process Orchestration

-- Model-Driven Integration

-- Automated and Integrated Data Exchange Mechanism

- Quality Assurance

-- Product and Process Metrics

-- Defect Detection

-- Process Monitoring and Tracing

-- New Technologies in Monitoring and Control Systems

-- Simulation and Virtual Startup (Digital Factory)

- Automated Testing

-- Test Case Generation

-- Verification and Validation

-- Tool Support for Testing

-- Formal Mechanism Applied in Testing

-- Applications for Automated Testing during Engineering

- AutomationML

-- Information Exchange between Different Activities of the Engineering Chain

-- Interaction of Different Stakeholders within the Engineering Chain

-- Consistency within the Engineering Chain

-- Model-Based Data Transformation/Exchange

-- Usage of Meta-Data for Practical Application within the Engineering Chain

- Industrial-oriented Topics

-- Empirical Evaluations

-- Use cases

-- Experience Reports and Lessons Learned

-- Tool Demonstrations

Important Dates

Submission of papers: July 25, 2011

Notification of acceptance: August 5, 2011

Submission of camera-ready papers: August 15, 2011

Workshop: September 5, 2011

Submission

Submit a full paper of at most 6 pages (IEEE formatting guidelines - http://www.computer.org/portal/site/cscps/), including figures and references. The contact author must provide the following information to the workshop chairs: paper title, authors' names, affiliations, postal address, phone, fax, and e-mail address of the author(s), about 200-250 word abstract, and about five keywords. Prepare your paper as a PDF file and submit it to the workshop organizers using the iATPA 2011 conference paper management system (http://www.easychair.org/conferences/?conf=iatpa2011).

Submission of a paper implies that should the paper be accepted, at least one of the authors will register and present the paper in the conference. Submissions will be reviewed by at least 3 PC members following a single-blind review process. Accepted papers will be given guidelines in preparing and submitting the final manuscript(s) together with the notification of acceptance.

Workshop Organization

Authors of accepted submissions will be asked to give a 10-15 minutes presentation of their research work. Presentations should include research results, interesting research questions, and open issues to be discussed during the workshop. After each presentation, a pre-assigned discussant will provide a critical review of the paper. This will be guided by a list of questions provided by the workshop organizers. Discussion points of major interest will be focused in a dedicated discussion session at the end of the workshop. Two particular roles are taken on by the iATPA attendees:

- A presenter presents his paper but additionally will be asked to take on the role of a discussant for another paper (all the papers will be distributed to the participants in PDF format approx. two weeks prior to the event).

- A discussant prepares the discussion of a paper. The discussants task is to give a review of the paper directly after its presentation. This task will be guided by a predefined set of questions provided by the iATPA organizers.

Workshop Organizers

Thomas Moser, Vienna University of Technology (thomas.mosertuwien.ac.at)

Heiko Koziolek, ABB (heiko.koziolekde.abb.com)

Richard Mordinyi, Vienna University of Technology (richard.mordinyituwien.ac.at)

Miriam Schleipen, Fraunhofer-Institute IOSB (miriam.schleipeniosb.fraunhofer.de)

Alois Zoitl, Vienna University of Technology (alois.zoitltuwien.ac.at)

Program Committee

Stefan Biffl (Vienna University of Technology, Austria)

Marco Colla (University of Applied Sciences of Southern Switzerland, Switzerland)

Lars Christiansen (Helmut-Schmidt-University Hamburg, Germany)

Ivica Crnkovic (Mälardalen University, Sweden)

Rémi Delmas (ONERA, France)

Deepak Dhungana (Siemens AG, Austria)

Michael Dierkes (Rockwell-Collins, France)

Rainer Drath (ABB Research Center Ladenburg, Germany)

Stéphane Duprat (ATOS Origin, France)

Elisabeth Estevez (University of Bilbao, Spain)

Christian Frühwirth (Aalto University, Finland)

Niels Hagge (Siemens, Germany)

Ingo Hegny (Vienna University of Technology, Austria)

Tina Kraußer (RWTH Aachen, Germany)

Jose Martinzes Lastra (Tampere University of Technology)

Odile Laurent (Airbus, France)

Pieter De Leenheer (Vrije Universiteit Brussel, Belgium)

Tiziano Leidi (University of Applied Sciences of Southern Switzerland, Switzerland)

Wilfried Lepuschitz (Vienna University of Technology, Austria)

Arndt Lüder (Otto-v.-Guericke University Magedeburg, Germany)

Robert Meersman (Vrije Universiteit Brussel, Belgium)

Ioannis Parissis (LCIS, France)

Oscar Pastor (Universidad Politécnia de Valencia, Spain)

Rick Rabiser (JKU Linz, Austria)

Szabolcs Rosznyai (IBM Research, US)

Nico Suchold (ifak Magdeburg, Germany)

Antonio Valentini (O?neida Inc., Canada)

Hélène Waeselynck (LAAS-CNRS, France)

Monika Wenger (Vienna University of Technology, Austria)

Dietmar Winkler (Vienna University of Technology, Austria)