12th International Conference RESEARCH AND DEVELOPMENT IN MECHANICAL INDUSTRY

Website www.radmi.org | Edit Freely

Category

Deadline: August 25, 2012 | Date: September 14, 2012-September 17, 2012

Venue/Country: Banja, Serbia

Updated: 2012-02-22 18:02:15 (GMT+9)

Call For Papers - CFP

? Research and development of manufacturing systems,

tools and technologies, new materials and product design;

? Tribology;

? Maintenance and effectiveness of technical systems;

? Quality management, ISO 9000, ISO 14000, TQM and

management in mechanical engineering;

? Application of information technologies and electronics in

mechanical engineering:

? Transport systems and logistics and

? Application of mechanical engineering in other industrial

fields.

Technical presentations

For the firms, which want to present their products,

technologies and services, the presentation space has been

provided. It will be possible to promote scientific books,

technical information and other propaganda materials.

Participation

Participation fee for authors and participants is 80, - EURO

(proceedings, CD-ROM, other printed materials, cocktails,

conference dinner and picnic).

For presentation firms the participation fee is 500, - EURO.

Important dates

August 20, 2012 Deadline for papers submission

August 25, 2012 Acceptance of papers by the International

Scientific Committee

August 30, 2012 Final programme

Information for authors

Papers will be printed in Proceedings on CD-ROM in

electronic form and/or in hard copy. Some selected papers

will be printed in International Journal.

Papers must be submitted in English language only.

It is necessary to send paper on max 10 pages until August-20-2012. The final paper must be camera-ready format in Word

by form of papers.

Paper size: 10 pages, A4 format

Margins: All margins are 2,5 cm.

Font: Times New Roman

Title of paper: All caps 14 pt Bold

Title of chapter: All caps 11 pt Bold

Text of paper: Small caps 11 pt

Abstract for paper: 10 pt Italic

Key words: 10 pt Italic

Spacing: Single line spacing

Send: Final paper send by e-mail: dasicp58gmail.com

and satcipyahoo.com.

Information and address for corresponding

Person for correspondence is:

Predrag Dašić, SaTCIP Ltd.

Tržni Centar Pijaca 106, 36210 Vrnjačka Banja, Serbia

Tel/fax: +381 36 622454,

Mobtel: +381 60 6926690 and +381 63 648855,

E-mail: dasicp58gmail.com and satcipyahoo.com,

Website: http://www.RaDMI.org/.

The First Conference ″Research and Development in Chemical and

Mechanical Industry″ - RaDMI 2001 was held upon the initiative of

Predrag Dašić and prof. dr Miroslav Radovanović in Kruševac from

October 22-24, 2001.

Until now, 11 conferences were realized. More than 2.000 papers

were accepted and published, from which 1.300 were from 40 foreign

countries of the world. Total number of authors and coauthors was

over 2.500. Papers of the 11 conferences were published in 20

proceedings in hard copy and 10 proceedings in electronic form (CD-ROM). Amount of printed material was approximately 16.000 pages.

Some papers from the 8th International conference RaDMI 2008 will

be printed in special issue of international journal from SCI-E list

″Strojniški Vestnik ? Journal of Mechanical Engineering″ Vol. 55, no.

2 (2009) (Web site: http://en.sv-jme.eu/).

The 12th

International Conference ″Research and Development in

Mechanical Industry″ - RaDMI 2012 will be held on 14-17.

September 2012, in Vrnjačka Banja, Serbia, in honor of 50 years

(1962-2012) of High Technical-Mechanical School in Trstenik.

ORGANIZING COMMITTEE

1. Predrag Dašić, SaTCIP Ltd., Vrnjačka Banja (Serbia),

Chairman

2. Mr Dragan Trifunović, director, High Technical Mechanical

School, Trstenik (Serbia), Vice-chairman

3. Dr Milutin Milosavljević, University of Priština ? Office

Kosovska Mitrovica, Technical Faculty, Kosovska Mitrovica

(Serbia)

4. Dr Vladeta Jevremović, High Technical Mechanical School,

Trstenik (Serbia)

5. Mr Ljiljana Pecić, High Technical Mechanical School,

Trstenik (Serbia)

6. Marina Stanojević, University of Niš, Faculty of Economics,

Niš (Serbia)

7. Dr Slobodan Radosavljević, Mining Basin ″Kolubara″,

Lazarevac (Serbia)

8. Mr Veis Šerifi, Technical Faculty, Čačak (Serbia)

9. Jovan Dašić, SaTCIP Ltd., Vrnjačka Banja (Serbia)

10. Danka Milićević, SaTCIP Ltd., Vrnjačka Banja (Serbia)

SCIENTIFIC COMMITTEE

1. Prof. dr Grigoryev Sergey Nikolaevich, rector, Moscow State Technological University

″STANKIN″, Moskva (Russia), Chairman

2. Prof. dr Valentin Nedeff, rector, University of Bacău, Faculty of Engineering, Bacău

(Romania), Vice-chairman

3. Prof. dr Friedrich Franek, University of Vienna and president of Austrian Tribology

Association, Vienna (Austria), Vice-chairman

4. Prof. dr Raycho Ilarionov, rector, Technical University of Gabrovo (Bulgaria), Vice-chairman

5. Dr Syed Ahmed, CSEM S. A., Surface Engineering Division, Neuchâtel (Switzerland)

6. Prof. dr Emilia Assenova, Technical University of Sofia, Sofia (Bulgaria)

7. Prof. dr Anatoly P. Avdeenko, Donbass State Engineering Academy (DSEA), Kramatorsk

(Ukraine)

8. Prof. dr Milun Babić, University of Kragujevac, Faculty of Mechanical Engineering,

Kragujevac (Serbia)

9. Prof. dr Nada Barac, University of Niš, Faculty of Economics, Niš (Serbia)

10. Prof. dr Rade Biočanin, University of Novi Pazar, Technical Faculty, Novi Pazar (Serbia)

11. Prof. dr Konstantin D. Bouzakis, Aristoteles University of Thessaloniki, Faculty of

Mechanical Engineering, Thessaloniki (Greece)

12. Prof. dr Miodrag Bulatović, University of Podgorica, Faculty of Mechanical Engineering,

Podgorica (Montenegro)

13. Prof. dr Traian Buidoş, University of Oradea, Faculty of Management and Technological

Engineering, Oradea (Romania)

14. Prof. dr Mikhail V. Burmistr, academician, rector, Ukrainian State University of Chemical

Engineering, Dniepropetrovsk (Ukraine)

15. Prof. dr Alexander I. Burya, academician, Dniepropetrovsk State Agrarian University,

Dniepropetrovsk (Ukraine)

16. Prof. dr Sorin Ciortan, University of Galati, Faculty of Mechanical Engineering, Galati

(Romania)

17. Prof. dr Ilija Ćosić, dean, University of Novi Sad, Faculty of Technical Scientific, Novi Sad

(Serbia)

18. Prof. dr Predrag Ćosić, University of Zagreb, Faculty of Mechanical Engineering Naval

Architecture, Zagreb (Croatia)

19. Prof. dr Alexandre Dolgui, Ecole Nationale Supérieure des Mines de Saint-Etienne, Saint-Etienne (France)

20. Prof. dr Ćemal Doličanin, rector, University of Novi Pazar, Technical Faculty, Novi Pazar

(Serbia)

21. Prof. dr. Branislav Dragović, vice-dean, Maritime Faculty, University of Montenegro, Kotor

(Montenegro)

22. Prof. dr Ljuben Dudesku, University of Skopje, Faculty of Mechanical Engineering, Skopje

(Macedonia)

23. Prof. dr Petru Dusa, Technical University ″Gh. Asachi″, Faculty of Mechanics, Iaşi

(Romania)

24. Prof. dr Ljubodrag Đorđević, High Technical Mechanical School, Trstenik (Serbia)

25. Prof. dr Vladan Đorđević, academician, University of Belgrade, Faculty of Mechanical

Engineering, Belgrade (Serbia)

26. Prof. dr Sabahudin Ekinović, rector, University of Zenica, Faculty of Mechanical

Engineering, Zenica (Bosnia and Herzegovina)

27. Prof. dr Volodymir A. Fedorinov, rector, Donbass State Engineering Academy (DSEA),

Kramatorsk (Ukraine)

28. Prof. dr Anatoly N. Fesenko, vice-rector, Donbass State Engineering Academy (DSEA),

Kramatorsk (Ukraine)

29. Prof. dr Milomir Gašić, University of Kragujevac, Faculty of Mechanical Engineering,

Kraljevo (Serbia)

30. Prof. dr Manfred Geiger, University Erlangen-Nuremberg, Erlangen (Germany)

31. Prof. dr Anatoly Ivanovich Grabchenko, National Technical University, Kharkov

Polytechnical Institute, Kharkov (Ukraine)

32. Prof. dr Nicolae Valentin Ivan, University Transilvania of Brasov, Faculty of Mechanical

Engineering, Brasov (Romania)

33. Prof. dr Isak Karabegović, dean, University of Bihać, Technical Faculty, Bihać (Bosnia and

Herzegovina)

34. Prof. dr Baki Karamiş, Erciyes University, Faculty of Mechanical Engineering, Kaysei

(Turkey)

35. Prof. dr Branko Katalinić, University of Vienna, Vienna (Austria)

36. Prof. dr Veijo Kauppinen, Helsinki University of Technology, Espoo (Finland)

37. Prof. dr Marianna Kazimierska - Grebosz, Technical University of Lodz, Faculty of General

Mechanics, Lodz (Poland)

38. Dr Sergei A. Klimenko, Director of Association of Mashine ? Bulding Technologists of the

Ukraine - ATMU, Kiev (Ukraine)

39. Prof. dr Karel Kocman, Technical University of Brno, Brno (Szech Republic)

40. Prof. dr Janez Kopac, University of Ljubljana, Faculty of Mechanical Engineering, Ljubljana

(Slovenia)

41. Prof. dr Viktor D. Kovalov, Donbass State Engineering Academy (DSEA), Kramatorsk

(Ukraine)

42. Prof. dr Marian Kralik, vice-dean, Slovak University of Technology, Faculty of Mechanical

Engineering, Bratislava (Slovakia)

43. Prof. dr Zdravko Krivokapić, vice-dean, University of Podgorica, Faculty of Mechanical

Engineering, Podgorica (Montenegro)

44. Prof. dr Janos Kundrak, University of Miskolc, Faculty of Production Engineering, Miskolc,

(Hungary)

45. Prof. dr Valeriy V. Kuzin, Moscow State Technological University ″STANKIN″, Moskva

(Russia)

46. Prof. dr Cristian N. Madu, Pace University, Lubin School of Bussiness, New York (USA)

47. Prof. dr Velibor Marinković, University of Niš, Faculty of Mechanical Engineering, Niš

(Serbia)

48. Prof. dr Vlatko Marušić, University of Osijek, Mechanical Engineering Faculty, Slavonski

Brod (Croatia)

49. Prof. dr Ostoja Miletić, vice-rector, University of Banja Luka, Faculty of Mechanical

Engineering, Banja Luka (Bosnia and Herzegovina)

50. Prof. dr Nikolay K. Myshkin, director, V.A. Belyi Metal Polymer Research Institute (MPRI),

Gomel (Belarus)

51. Prof. dr Onisifor Olaru, dean, University ″Constantin Brancusi″ of Tg-Jiu, Faculty of

Engineering, Tg-Jiu (Romania)

52. Prof dr Constantin Oprean, rector, ″Lucian Blaga″ University of Sibiu, Sibiu (Romania)

53. Prof. dr Liviu Palaghian, University of Galati, Faculty of Mechanical Engineering, Galati

(Romania)

54. Prof. dr. Nam Kyu Park, Tongmyong University, Busan (Korea)

55. Prof. dr Jozef Peterka, vice-dean, Slovak University of Technology, Faculty of Material

Sciences and Technology of Trnava, Trnava (Slovakia)

56. Prof. dr Geanina Podaru, University of Galati, Faculty of Mechanical Engineering, Galati

(Romania)

57. Prof. dr Narcisa Popescu, University ″Politehnica″, Bucharest (Romania)

58. Prof. dr Stanislaw Pytko, Technical University of Krakow, Krakow (Poland)

59. Prof. dr Snežana Radonjić, University of Kragujevac, Technical Faculty, Čačak (Serbia)

60. Prof. dr Miroslav Radovanović, University of Niš, Faculty of Mechanical Engineering, Niš

(Serbia)

61. Prof. dr Georgi Rashev, dean, Technical University of Gabrovo, Faculty of Mechanical

Engineering, Gabrovo (Bulgaria)

62. Prof. dr. Dong-Keun Ryoo, College of International Studies, Korea Maritime University,

Busan (Korea)

63. Prof. dr Igor Sergeevich Sazonov, rector, Belarusian-Russian University (BRU), Mogilev

(Belarus)

64. Prof. dr Adolfo Senatore, University of Salermo, Faculty of Mechanical Engineering,

Fisciano (Italy)

65. Prof. dr Vladimir P. Sergienko, director, V.A. Belyi Metal Polymer Research Institute

(MPRI), Gomel (Belarus)

66. Prof. dr Dimitri Yu. Skubov, State Technical University of Sankt Petersburg, Sankt

Petersburg (Russia)

67. Prof. dr Georgy Slynko, academician, Zaporozhye National Engineering University,

Zaporozhye (Ukraine)

68. Prof. dr Mirko Soković, University of Ljubljana, Faculty of Mechanical Engineering,

Ljubljana (Slovenia)

69. Prof. dr Viktor Starkov, Moscow State Technological University, Moscow (Russia)

70. Prof. dr Ljubodrag Tanović, University of Belgrade, Faculty of Mechanical Engineering,

Belgrade (Serbia)

71. Prof. dr Peter M. Talanchuk, academician, National Technical University of Ukraine, Kyiv

Polytechnic Institute (KPI), Kyiv (Ukraine)

72. Prof. dr Oleg Vasilevich Taratynov, academician, Moscow State Industrial University,

Moscow (Russia)

73. Prof dr Mihail Titu, ″Lucian Blaga″ University of Sibiu, director of Intellectual Property

Department, Sibiu (Romania)

74. Prof. dr Mirela Toth-Tascau, Politehnica University of Timişoara, Faculty of Mechanical

Engineering, Timişoara (Romania)

75. Prof. dr Nikolaos Vaxevanidis, Institute of Pedagogical & Technological Education, N.

Heraklion Attikis (Greece)

76. Prof. dr Karol Velisek, Slovak University of Technology, Faculty of Material Sciences and

Technology of Trnava, Trnava (Slovakia)

77. Prof. dr Nataliya Vodolazskaya, vice-dean, Donetsk National Technical University (DNTU),

Donetsk (Ukraine)

78. Prof. dr Edward Walicki, University of Zielona Gora, Faculty of Mechanics, Zielona Gora

(Poland)

79. Prof. dr Ton vad der Wiele, Erasmus University, Rotterdam School of Management,

Rotterdam (Netherlands)

80. Prof. dr Carol Zoller, University of Petrosani, Faculty for Mechanical and Electrical

Engineers, Petrosani (Romania)